Can a blower motor be put in upside down to where the air doesn't blow out of the vents? - how to put a blower motor in on a 96 chevy cavalier
Most fan motors can not be installed on the head by the mounting configuration, but cable can be reversed, causing the motor rotate in the opposite direction.
Thursday, February 11, 2010
How To Put A Blower Motor In On A 96 Chevy Cavalier Can A Blower Motor Be Put In Upside Down To Where The Air Doesn't Blow Out Of The Vents?
2 comments:
He worked at a Chevrolet with a new "generic" fan. He was in line with everything but put the fan it would not explode. It was a Chevrolet pick-up and the fan came from Napa. It looked exactly like the original, but the issue of fan (center) was 1 / 2 inch on one side and only in the plastic, not to rotate.
So you must close with the big hole, no matter where the cables supplied or rubber engine ventilation.
The main question is why? If you do not want the vents to work, only with a little block. Most cars have wires or tubes of all kinds terrestrial channels for the exhaust gases. Turn off the road and are equipped with air blowing from vents. Hope this helps and good luck!
Post a Comment